ShopCustom
Your idea, a spare part or a measurement: we design it and 3D print it.
Send photos or a few measurements and we reply with a quote within 24 hours at most. We model every piece from scratch in Bogotá, with exact measurements.
Price in seconds
If you already have the files (STL, 3MF, OBJ, STEP or IGES), drop them here: you see each part in 3D on the printer bed and the estimated price of all of them together, with the grams and printer hours they take. If you do not have them, build a washer, a plug, a leg cap, a wedge or a box with a lid here from your measurements, or send photos or a few measurements with the form at the end.
Five parts you build by typing their measurements in millimeters. The browser builds the file and the part joins the quote like any other; the file goes with your order.
The hole comes out 0.2 mm larger than the screw, so it goes in without forcing, as our file preparation guide says. With 0 for the screw, you get a disc with no hole.
How the price adds up, with 17 real parts →
If you draw your part: the measurements that print well →
What we make
Spare parts
The piece that broke and can no longer be found, copied from the original or from its measurements.
Brackets and adapters
To mount, hang or join something that does not come with a way to do it.
Technical parts
With exact measurements and tolerances, to fit into a profile, a tube or a machine.
Jewelry from a sketch
Your drawing or your reference photo, modeled and cast in 925 silver.
Real jobs

Setting block for a glass railing
An installer needed setting blocks for the bottom of an aluminum railing profile, with 16 mm glass and a channel for an LED strip. We designed it to the profile's measurements, in segments that fit into each other, in a white plastic that withstands the sun.
RENDERPush-in cap
A cap that pushes into place and flexes, with 1 mm walls. Printed in the most common plastic it broke when fitted; in a tougher resin, it did not.
Why the setting block is in one plastic and the cap in another, with the figures for each material: which 3D printing material to choose.
How it works
01
You tell us
Photos from several sides (up to five), one with something that shows the scale (a ruler or a coin), the measurements you have, what it is for and how many units.
02
We quote within 24 hours
In writing, with the material, the total price and the lead time. If 3D printing is not the way to make it, we tell you.
03
We design it and print it
We model it with exact measurements and reinforce it where it is thin. The lead time runs from payment.
Frequently asked questions
For a price in seconds, STL, 3MF, OBJ, STEP or IGES: the quote tool measures them in your browser. With no file, the same tool builds a washer, a plug, a leg cap, a wedge or a box with a lid from your measurements; for anything else, photos with something that shows the scale or a few measurements are enough: the form takes up to five photos, which your browser shrinks before sending them, and a PDF or a 3D file of up to 3 MB.
Yes. With photos from several sides, one with something to show the scale (a ruler or a coin), the measurements you have and what it is for, we model it from scratch with exact measurements and send you the quote within 24 hours. If it is a spare part, the measuring guide says which measurements to take.
In one piece, up to 242 × 242 × 250 mm, which is what fits in the printer. Anything bigger we print in parts and quote by hand.
We print in ASA, which withstands sun and heat and is our default; PETG, tough for everyday use; PLA, for indoor use and with more colors; and resin, for fine detail, which we quote by hand. Jewelry is cast in 925 silver. The materials guide compares their figures.
Yes: COP 25,000 per order, and one order can take several parts, with a single minimum for all of them. If the part comes to less, you pay the minimum.
We confirm the price in writing within 24 hours. From payment, the part ships within 2 business days, or 5 from 10 units, and orders with many printer hours take a little longer. In Bogotá we deliver to your door, and to another city it goes by courier with tracking; if you upload the file, the quote tool tells you around which day it ships and arrives if you order today. If it needs designing, the design time comes in the quote.
With Bre-B or bank transfer, from any Colombian bank, Nequi or Daviplata. Custom printed parts are paid in full before we start, once we confirm the price in writing, and the lead time runs from payment. For a piece of silver jewelry, the quote says how much is paid and when. There is no cash on delivery.
Yes, at no cost until the moment you pay: the quote does not commit you. After that, since the part is made to your design or your measurements, it has no right of withdrawal, but it does carry the six month warranty against manufacturing defects; and if we go past the agreed lead time, you can cancel and we refund everything you paid within 15 calendar days. It is all in the terms of sale.
We use it only to quote and make your part: we do not print, show or share it without your permission, and the design is still yours. In the quote tool it is measured in your browser and does not leave your device until you order; when you order, it reaches our email and is not stored in any external database, as the privacy policy says.